Видео

VvRooOOM

That is genius! Thank you. Now I can get to my ignition switch.

I have a colorado z71 4x4 with the eaton G80 and you need to use 75w90 sintetic oil and add this Chrysler Mopar Fluid 4318060AB Limited - Aditive Anti-slide

If it doesn't want to rev with out the choke on then u need to adjust ur fuel and air adjustment screw and play with the jets cuz obviously it doesn't have enough fuel mixture that's why it runs the best with choke on cuz with choke on it gets less air and more gas but if u put a bigger main jet in then it should run fine with choke off

Thanks for the help😊

Good Work 👍

i have this welding for 3 years, now i want to try this out it looks simple

🤘🤘

Needs adjusted real bad sounds terrible got a bad hesitation but those Rochester carburetor are the best

very nice where did you find that??

You can tell if a car has a quadrajet when it kicks the secondaries in Nothing sounds as sweet!

From watching this video now I can really wheelie good

Where can I come and buy it?

Had that same exact carburetor on my built 305 back in the day what a great carburetor 👍 yes it was off a 327.

Dont watch when hungover

I believe thats an s15 cuz its a gmc

No part 2? Trying to do the same to mine.

3/4 cam

Wrapped Headers & OE rockers ??

So did u put the MSD ignition in the mower or is the lame sticker cool. I guess if 18 mph is fast for u then this mower is the best knees.

That's cool I have a newer one.

Nice bike man! I got a mini bike with a series 30 Comet CVT I found on Kijiji for only $25! They sell for couple hundred at the local princessauto lol. 2 weeks later I got another one for only $40 lol. But they work SOOOOO much better then a clutch!! The torque from them is amazing! I have to be careful cuz it easily will flip me on my back if I twist the handle all the way lol. They're also great for Go-Karts and drift trikes! I like your projects! Keep up the good work! Love custom built stuff! Right now I'm building a cross-kart with a 1000cc Ninja street bike engine (Which red lines at 13,000RPM!! Spins Tires FAST) on a roll cage with a racing seat & harness. Has independent suspension and a beautiful aluminum hand brake for drifting! The steering angles are increased and the steering is super quick with like 1.25 turns lock to lock for the ultimate drifting vehicle. We have a drift track 30 min from my house! So will be sweet! Once a year they even close off 1/4 of the town its in and we get to drift on the streets for a 3 day competition! It's a blast!

Like to find one of those rear sway bars for my 93 S10. One upgrade I did was find the fatty 1 5/16" sway bar for the front. It does help the handling over the stock wimpy 1 1/16 sway bar.

I take it you used the shims & bearings from the donor vehicle. It'd be Interesting to hear how its held up Looking to change the gears on my Sierra with 3.73s i got from a tahoe. I wanna save the TruTrac that's currently in my truck

Gotta love that 4 barrel sound ❤❤

Although this video is 2 years old, I'll throw my $.02 in the mix. If you have an early 2WD S10, the hot ticket is to find a '98 or newer 2WD S10 Blazer that has the disc brake rearend in it at the local picknpull. Most of these have the 3.42 gear installed. It may or may not have the G80 Gov-Bomb locker in it. Take the entire rearend home with you. Next find a '98-02 Camaro/Firebird with the G80 in it and take this differential home with you. This will be the 7.5/7.625 Torsen differential that GM put in the f‐body to hold up with the LS1/ manual 6 speed, and it bolts into the S10 rearend. Remove the POS Gov‐Lok and install the Torsen differential using the S10 gearset if you like. New gearset, bearings, races and seals are a bonus. You're going to have figure out some stuff with rear brake lines, e-brake cables, and 4 wheel disc front to rear balance/valving and master cylinder issues. Good luck.

It looks good bud, thanks for the idea

A lot of people hate quadrajets but I’ve always liked them. Diaphragms go bad quick in these. My first car was an 84 Monte Carlo ls just a little 305 with a little 428 cam and 882 heads didn’t run when I got it and done all the work over the summer girls would call it a piece of shit because it didn’t move for like three months but I made minimum wage. I wish I still had that car it looked so sick and sounded great it was heavy though but who cares. The only thing I didn’t like about my quadrajet carb is it was so cold collared of morning.

I’ll be making these tail shaft housing out of a new cast design soon

Throaty

Jesus, I'd have $100 just in nuts and bolts alone!! ROFL!!! That thing isn't going to last long, but it's a good mock up for making a real one. Peace out.

My 8hp go cart was uncomfortably fast it did 40mph when I was a kid. I’m scared just looking at this thing.

What 8HP is that from, and what carb are you using

What amp service do you run and what gauge wire for that service, thx EZ

Not going to get that sound with fuel injection.

It looks sick bud, im building a old yardpro trractor with a 18 hp.Vanguard with a spicer 6 speed but i have a couple peerless as well, where in Canada are you? Im in ontario

Should have just removed the weight

That stuff can seriously fuck your lungs up even outside

How's the transmission after welding, everything it's work perfect?

How can it be so slow my 49cc minimotard is faster than that

is it the normal motor? i have an mower but dont have an engine ... and the steering function on the weels is broken

Good job and you got a nice collection of s series trucks

Ahhhh finally a video with actual proper instructions on how to pop a wheelie!!!! Thank you young man, idk but every other video that was titled "how to wheelie on a mini bike" didn't give any vocal instructions & if they did it was very vague, not sharing the important keys to a successful front lift, it was just like pull the handle bars & punch the gas, well shit I know that, but everything you said was super helpfull, thank you young man. I'm go to it out in a couple hrs when the sun comes up, but imma try it at the park on the grass, can't wait till then, if im successful at it, I will rec it & upload my very first video ever on RUclips, so wish me luck...

I love Canadian TIre.

How did you swap the belts it was hell for me

What's with the added pulley? Was it throwing belts?

Nice mine goes 45mph brand new motor with less than three hours on the motor my go kart is it two seater it’s pretty big I have 200 pounds

Love old American muscle nothing like it

A simple tape measure and a straight edge would have been quicker. your tractor is set up to push snow with that plow and not dump anything. it is lacking the height that is why them concrete chips got wedge when you tried top dump.. The way it is.. you might be better of just using a hand shovel . Maybe use autocad next time to re design that lever ?

The belt should be on top of the idler from what I can see